Store

6520-1 Combo

SPI 2K Regular Build Grey Primer Kit 4:1

$150.00

Mix: 4:1 4 parts primer to 1 part activator. Mix / stir activator in very well for at least one minute. This primer can be reduced with SPI urethane reducers 870, 885 and 895. Do not reduce more than 25%. Pot Life: 45-60 minutes at 75°

Spraying: Always coat bare metal with epoxy first! Mix only what you immediately need and clean the gun when you are finished. Spray a full wet coat and let it flash. Spray a total of two or three coats being sure to let each coat flash before spraying the next coat. Flash times will vary from 3-5 minutes depending on temperature.

Filling: This primer is the same as our High Build Primer except it will spray a little thinner at about 1.8 to 2.0 mills per coat depending on the primer / paint gun used. This is an excellent primer for the high quality shop that does not need a very high filling primer. This primer is made to fill like the major paint manufacturers best 2K primers. A sealer is not required for this primer prior to painting.

Sanding: Depending on how you applied it and current temperature this primer should be ready to sand in 30 minutes. If sanded primer has set more than 24 hrs, you must scuff first with a red scuff pad or equivalent before applying another product.

Kit includes

(1) – #6520-1 Regular Build Grey 3.78 liters

(1) - #6501-4  Regular Build Primer Activator  .946 liters

TECH SHEET

MSDS SHEET

Specs


Mix: 4:1 4 parts primer to 1 part activator. Mix / stir activator in very well for at least one minute. This primer can be reduced with SPI urethane reducers 870, 885 and 895. Do not reduce more than 25%. Pot Life: 45-60 minutes at 75°

Spraying: Always coat bare metal with epoxy first! Mix only what you immediately need and clean the gun when you are finished. Spray a full wet coat and let it flash. Spray a total of two or three coats being sure to let each coat flash before spraying the next coat. Flash times will vary from 3-5 minutes depending on temperature.

Filling: This primer is the same as our High Build Primer except it will spray a little thinner at about 1.8 to 2.0 mills per coat depending on the primer / paint gun used. This is an excellent primer for the high quality shop that does not need a very high filling primer. This primer is made to fill like the major paint manufacturers best 2K primers. A sealer is not required for this primer prior to painting.

Sanding: Depending on how you applied it and current temperature this primer should be ready to sand in 30 minutes. If sanded primer has set more than 24 hrs, you must scuff first with a red scuff pad or equivalent before applying another product.

Kit includes

(1) – #6520-1 Regular Build Grey 3.78 liters

(1) - #6501-4  Regular Build Primer Activator  .946 liters

TECH SHEET

MSDS SHEET